• Bild
在成熟技术和新技术之间的挑战性选择中,只有那些以核心能力为中心,并任由市场驱动导向的企业才会成功。翻开 SSM 公司的历史和前瞻其未来,均能证明 SSM 公司始终将这一挑战性的选择作为创新解决方案的激励机制。
  • 1855
  • 1894
  • 1906
  • 1912
  • 1925
  • 1973
  • 1984
  • 1986
  • 1989
  • 1990
  • 1995
  • 1998
  • 1999
  • 2003
  • 2003
  • 2003
  • 2003
  • 2003
  • 2004
  • 2005
  • 2007
  • 2008
  • 2012
  • 2013
  • 2015
  • 2016
  • 2017
  • 2019
  • 2020
  • 1855
    Bild

    Jean Schweiter和Heinrich Schrader建造了一台最早的机械式小纺锭络筒机。

  • 1894
    Bild

    近40年后,Jean Schweiter 接管这个车间并将其发展成机械制造公司。

  • 1906
    Bild

    Jean Schweiter凭借其横置锭子更换的发明使自己及公司获得纺织界的公认。

  • 1912
    Bild

    创立 Schweiter AG 并进行工商注册。

  • 1925
    Bild

    New building for Schweiter in Horgen Oberdorf.

  • 1973
    Bild

    Schweiter 股票在 SWX 瑞士证交所上市交易。

  • 1984
    Bild

    Step precision winding, developed by Schweiter in the 1970s and registered in1984, combines the advantages of random winding and precision winding. The ratio between double strokes and number of revolutions is kept constant for a certain diameter range. The crossing angle varies only slightly within a range of ±1°. This results in an enhanced package density that does not change with increasing package diameter. So the building of pattern zones is avoided and the package maintains a stable structure without any ribbons. Due to this stable structure, the risk of complete layers “slipping off” during the unwinding process of dyed packages, as known with random winding, is completely eliminated.

  • 1986
    Bild

    Hans Widmer 收购 Schweiter 多数股份。

  • 1989
    Bild

    Schärer、Schweiter 和 Mettler 三家企业合并为 SSM AG。并在同一年成立 Schweiter Technologies 控股公司。

  • 1990
    Bild

    In weaving a better package with long yarn length and good unwinding behaviour at high unwinding speed is essential to optimal efficiency and high product quality. If packages with increasing diameter are built first with constant traverse and then with traverse shortening, we then speak of MEGACONE®

  • 1995
    Bild

    Traversing system with separate drives for the spindle and the traverse motion. Traverse length and lay spacing are infinitely adjustable and set by entering the corresponding parameters into a central terminal.

  • 1998
    Bild

    The groove drum winding machine from SSM with creative design and reduction to the necessary - the winding system ClassicWind™ delivers a competitive edge that is hard to beat.

  • 1999
    Bild

    收购两家德国公司,罗伊特林根的 Stähle Eltex 和武珀塔尔的 Hacoba Spultechnik。

  • 2003

    digitens™ 数码张力器

    Bild

    在线卷绕张力控制系统,用于生产最佳卷装质量。

  • 2003
    Bild

    The slub yarn device enables random or periodic flames with thick and/or thin places in the yarn can be produced directly on individual or assembled yarns. Such effect yarns can be produced on air-texturing machines or anywhere you need to vary yarn tension to create a fancy-effect yarn. The flame and random effect in the yarn is controlled through a lifting device with a pull- and an over feeding phase. These yarns are applied in a variety of applications such as curtains, ladies wear, furniture fabrics etc.

  • 2003
    Bild

    With improved performance is an evolution of the unique SSM traverse technology. While alternative electronic yarn guide systems from other suppliers do not yet achieve the 1995 performance level of preciflex™, fastflex™ steps into the next generation with a performance increase of about 50 %. Therefore, any type of material may be processed at maximum level of productivity.

  • 2003
    Bild

    It allows a highly precise and controlled hot or cold application of lubricant to the yarn surface. Temperatures up to 95 °C, gear pump with 0.3–15 g/min. capacity per spindle position, and other parameters can be set directly at the lubrication device or through the central terminal. The lubricant is applied to the yarn surface through special dispensing pads. One mixing tank delivers lubricant to max. 20 spindles. The gear pump delivers proportional to the thread winding speed.

  • 2003
    Bild

    Opening of SSM Zhongshan, China.

  • 2004
    Bild

    With the jet processed online monitored yarn quality system, SSM has overcome the problems in quality control of the air texturing process and offers now an overall solution for the production of ATY of all different types. The idea of this concept to collect all data of the texturing process and analyse the fluctuation of the parameters. Certain combinations of fluctuations will indicate the major defects in the texturing process. For the supervisor of the production it is very important, that the settings for the system are made very easily and also the monitoring of the quality will just indicated by red lights. Additionally the machine position will stop when defined quality parameters are out of range. The position of the final wraps then also indicate the grade of the quality.

  • 2005
    Bild

    Tension controlled unrolling device for bobbins, muffs and hanks. With the precitens™ system the bobbin is positively driven. The unrolling tension is continuously monitored and unrolling speed of the bobbin is adapted accordingly. The result is a perfect package and yarn of the highest quality

  • 2007
    Bild

    Designed to maintain a lower and quasi-constant yarn tension on the feed package in the rewinding process. This innovation comprises a variable distance between the top of the feed package and the first thread guide in relation to the feed package diameter. By doing so, the yarn balloon remains constantly single and the yarn off-wind tension remains practically constant along the entire length of the feed package.

  • 2008
    Bild

    Asymmetric winding from right to left, the asymmetry varying with the diameter of the package. The result is a better unwinding performance of winding packages for weaving applications by constant unwinding speed over head, the detaching point (balloon) rotates with variable speeds.

  • 2012
    Bild

    Acquisition of the Italian company Giudici S.p.A. in Galbiate.

  • 2013
    Bild

    It is based on the patent pending technology of XRCT (x-ray computed tomography) for yarn bobbins. For every producer of dye packages it is essential to maintain a homogenous density in their final products. Until now the techniques of analysing the density were rudimentary. With x-view™ SSM offers a cutting-edge service for its customers. The precise analysis reveals the inner quality of the product.

  • 2015
    Bild

    The introduction of the XENO platform opened new possibilities for optimizing the winding algorithm. Thanks to this new machine platform, SSM could release DIGICONE® 2, enabling an increase of dye package density by another 10-24% with unchanged dyeing recipes.

  • 2016
    Bild

    New location for SSM Zhongshan in the Cuiheng New District, Zhongshan

  • 2017
    Bild

    On June 30, 2017, Rieter acquired the SSM Textile Machinery Division (SSM) from Schweiter Technologies AG, Horgen (Switzerland).

    Rieter is the world’s leading supplier of systems for short-staple fiber spinning. Based in Winterthur (Switzerland), the company develops and manufactures machinery, systems and components used to convert natural and manmade fibers and their blends into yarns. Rieter is the only supplier worldwide to cover spinning preparation processes as well as all four end spinning processes currently established on the market. With 15 manufacturing locations in nine countries, the company employs a global workforce of some 5 020, about 20% of whom are based in Switzerland. Rieter is listed on the SIX Swiss Exchange under ticker symbol RIEN.
    www.rieter.com

  • 2019
    Bild

    preciforce™ is the first and only backpressure system on a winding machine which regulates the contact force in a range of 200 – 8’000 cN with precise accuracy, regardless of whether hard- or soft-packages are wound. Due to the innovative design, no manual backpressure adjustments, commonly known on winding machines with pneumatical or mechanical backpressure systems, are any longer required.

  • 2020
    Bild

    New location & production facilities for SSM Switzerland. On July 1st 2020, SSM has moved their factory to a brand-new building equipped with a top modern assembly line, product development and new showroom that stands as a technology center for product presentations and customer-specific trials.