Service-News

As of January 1st 2019 Roman Haefeli has started as Head of Sales and member of the management board of SSM Horgen. Mr. Haefeli holds a degree in mechanical engineering from the Swiss Federal Institute of Technology (ETH) and many years of experience in research, development, operations and sales.

SSM welcomes Roman Haefeli and wishes him a good start and a lot of success and fulfillment in his new function.

SSM Schärer Schweiter Mettler AG

He has started as of February 1st 2019 as CFO and member of the management team of the SSM Group. Mr. Mori holds a Bachelor of Science in Business Administration from the University of Applied Sciences in Southern Switzerland (SUSPI) and has many years of experience in finance and controlling.

SSM welcomes Mr. Mori and wishes him a good start and a lot of success and fulfillment in his new function.

SSM Schärer Schweiter Mettler AG

纱线以及卷装的多样性 - 特殊挑战
问题是：络筒机通常不能够直接生产出易于染色的卷装，这是由于存在粗支纱，低支纱，粗糙纱细，光洁纱线，圆柱形卷装以及圆锥形卷装 … 其原因数不胜数。优异的络筒机会将所有的参数都考虑进去，同时，能持续稳定地生产高品质卷装。一旦纱线卷装以不理想的方式卷绕，这种状况会导致下道工序出现问题，从而使得产品处于劣势。这种劣势会消耗大量的时间与金钱，这也正是竞争激烈的纺织行业的致胜要素。因此，SSM与著名的大学合作，开发出特定的纱线排列程序，无论何种纱线，均可使络筒机能够卷绕出完美的卷装。

以图像取代实验室测试
工程师们和数学家们选择特殊的方法，他们并不是测量纱线张力，线密度，材质以及纱线直径，并将这些参数集合至复杂的公式中，而是将SSM的专业知识转化为理论，这样做能够对筒子纱的结构以及密度分布精准预测。从数论中运用这些方法，最终专业技术人员能控制络筒过程中的“混乱动态系统”。

以这套算法为基础，开发出的DIGICONE®2算法能嵌入到络筒机控制系统软件中。通过络筒过程中的高速记录以及借助X线计算机层析成像技术，最终证实了SSM在这一项目上的成功（见对比图像）。结纶：相同结构的络筒机，之前并不总能卷绕出容易染色的筒子，而通过新的软件控制，则达到了这样的目的。

创新带来的竞争力优势
由于SSM与著名大学的合作，这一想法得以最佳地实施。Karaarslan说“DIGICONE®2算法使得我们能够在络筒机的市场上保持领先地位”。目前这种算法已经成功地运用在最新一代SSM机器上，顾客也已实质性地从中获益。

更多有关SSM的解决方案，请联系：
SSM Schärer Schweiter Mettler AG
Neugasse 10, CH-8810 Horgen / Switzerland
L_hc__mss--ofni, www.ssm.ch

This year’s show attracted a large number of visitors. SSM as one of around 1'700 exhibitors from 28 countries and economies could impress the visitors by showing a wide range of applications and latest technology solutions to help textile producers to become more competitive.

For the first time ever, SSM presented their brand new drum winder with lowest power consumption per spindle. The small pitch and integrated control cabinet maximize the space utilization. Thanks to the new developed and single controlled motor, it is the ideal machine for an energy efficient rewinding of cones used in the weaving, warp knitting and circular knitting process.

Undoubtedly the air texturing machine from SSM attracted the largest attention. Benefitting a wider range of applications, such as fancyflex™ options for the production of slubs and thick & thin effects. Besides of this, several new product launches had been introduced to the public as well.

SSM would like to take this opportunity to thank everybody who visited the booth and is looking forward to future partnerships and collaborations.

SSM Schärer Schweiter Mettler AG

Altex Machinery International Ltd achieved this appreciation for the professional representation of our products and corporate values, the executed promotional activities and the achievement of the sales targets set for the year 2017.

The precious award was handed over by the SSM CEO Dr. Davide Maccabruni to Albert Lai during the agent meeting prior to the exhibition ITMA Asia in Shanghai.

SSM Schärer Schweiter Mettler AG

TEXTIMA Export Import Gmbh achieved this appreciation for the professional representation of our products and corporate values, the executed promotional activities and the achievement of the sales targets set for the year 2017.

The precious award was handed over by the SSM Sales Manager Önder Günes to Sascha Händler, Nargisa Machkamova, Sajora Khasankhanova, Djakhangir Djabbarkhodjaev and Khanifa Bastamkulova, during the exhibition Caitme (5-7 Sept. 2018) in Tashkent.

SSM Schärer Schweiter Mettler AG

The exhibitions in Colombia, Bangladesh, Russia, Indonesia and Pakistan took place on joint booths of the SSM representatives. During the shows, SSM met many existing, and also potential new customers that showed interest in their products. Thanks to the great effort and support of the SSM agents the exhibitions have been a great success.

For Japan Yarn Fair and Saigontex, SSM had their own booth with the kind support of their local representatives. There, the main focus was given to the high range of possibilities SSM customers could profit. With final packages, wound on SSM machines, as well as knitted textile samples the visitors could feel the difference.

The biggest appearance of SSM was at the ITM in Istanbul, where they combined the sample bobbins & textile (made on the TG30-ETC) with the winding and yarn process machines, such as DP5-T for creating slubs and neps, the XENO-AC for air covered yarns or the XENO winding and doubling machines including DIGICONE® 2 for higher dyeable package densities. Last but not least the PWX-MTC, SSM’s latest machine for rewinding of highly elastic yarns on muffs or hanks, had been showed.

Over all SSM had a successful appearance on the shows around the globe in the first four month and they are looking forward to the exhibitions to come, in order to serve the market with their latest and best solutions for the textile industry.

Until then, detailed information about their textile machines with leading technology is available on SSMs webpage.

For further information please contact:
SSM Schärer Schweiter Mettler AG
Neugasse 10, CH-8810 Horgen / Switzerland
L_hc__mss--ofni, www.ssm.ch

What’s a stable electricity supply?

An electricity supply is characterized by frequency, magnitude, waveform and symmetry of the three-phase-voltages. If the following disturbances exceed certain limits then the quality will be affected:

• main power shortages
• jitter light
• voltage variations
• frequency variations
• slow and rapid voltage changes (over-voltage, spikes)
• unbalance of three phase voltage
• harmonic distortion

An exact definition of a stable supply is given in the European Norm (ex. EN50160). SSM assures its machine function correctly if the norm is fulfilled.

How to test the electricity supply

To test if a supply is inside the norm you have to analyse your net over a long time. Variations over the seasons have to be taken into consideration (summer/winter influences etc.). Often a weekly analyse will give you sufficient information about your net. SSM can offer a short analyse of your net. Very often though consumers know their supply. Important are the amount of main power shortages and voltage variations.

How to connect the machine to the supply

A lot of errors can be avoided by connecting a machine correctly:

• Is the grounding system of the machine correct?
• Sufficient cross section of the supply pipe?
• Avoid connecting machines of different power classes to the same main distributor.

How to protect a machine

There are a number of devices that can help to protect a machine, e.g. UPS (unbreakable power interrupt), power stabiliser, flash protector, or net filter. It is important to choose the best and most economical solution. The beside checklist will help you to choose appropriate equipment.

The spinning operation comprises six spinning mills having 225,000 spindles. A wide variety of yarns are produced in these mills. The spinning mills annually produce approx. 42’000 tons of yarn. In their twisting set up they have 100 TFO machines with a daily production of approx. 66’543 kg. Main count range is Ne 6/2 to 80/2. So far, Indus Group is working with around 600 spindles of SSM assembly winding machines: CW1-D, TW2-D and the latest TWX-D

To find out what impact the SSM machines had on their success, MAKVIZ (SSM agent) have interviewed Mian Shahwaiz Ahmed (one of the owners):

What made you believe that SSM AG was the best for achieving your desired result?

In 2005 we bought the first machine CW1-D assembly winder from SSM AG. Since it is a drum winder we didn’t get many extra benefits comparing to other options available in the market, however we found the best after sales service and support from SSM. Later on we bought some Japanese and Indian assembly winders which were not as good as the SSM drum winder machines.

In 2014 MAKVIZ came up with the new idea of knot-free packages on same size TFO pot. We bought the first TW2-D precision assembly winder from SSM and surprisingly with the help of the precision winder we got knot free package which helped us to improve the efficiency of our TFO machines and eliminated our major complaint of twist variation due to knots/splices.

Having this experience we bought seven SSM precision assembly winders (TW2-D / TWX-D) within our group up till now.

How did you find the machine/service of SSM and are you happy with the completed job?

With no second thought, SSM manufactures the most eligible machine to perform the desired job and we enjoy the best after sales services from SSM compared to any other supplier in the world.

Would you extend your production with SSM machines and recommend them to a friend?

We are in process to replace our old winders and SSM’ precision winders are our first and only choice, since we are proud to have the SSM brand in our production facility. We are already recommending SSM precision winders to other textile companies.

What are the two most significant improvements that have resulted from work with SSM AG?

We are able to achieve approximately 25-30% more weight on the same package dimensions, with the help of SSM precision winders, compared to random wound package. We are running SSM’s new model TWX-D at highest speed without any yarn breaks, due to proper tension control on all spindles, which helps to gain higher efficiency on the TFO process.

Mission statement of Indus group

We aim to provide superior products, financial security, high performance and quality services that fully meet the needs of our customers and maintain the financial strength of our company. We invite our valued Clients to come and see us how beautifully we are doing all this.

For more information about SSM solutions please contact:
SSM Schärer Schweiter Mettler AG
Neugasse 10, CH-8810 Horgen / Switzerland
L_hc__mss--ofni, www.ssm.ch

The ratio between double strokes and number of revolutions is kept constant for a certain diameter range. The crossing angle varies only slightly within a range of ±1°. This results in an enhanced package density that does not change with increasing package diameter. So the building of pattern zones is avoided and the package maintains a stable structure without any ribbons. Due to this stable structure, the risk of complete layers “slipping off” during the unwinding process of dyed packages, as known with random winding, is completely eliminated.

The introduction of the XENO platform opened new possibilities for optimizing the winding algorithm. Thanks to this new machine platform, SSM could release DIGICONE® 2, enabling an increase of dye package density by another 10–24% with unchanged dyeing recipes.

For more information about SSM solutions please contact:
SSM Schärer Schweiter Mettler AG
Neugasse 10, CH-8810 Horgen / Switzerland
L_hc__mss--ofni, www.ssm.ch

At the ShanghaiTex 2013 SSM has introduced the x-view™ density analysis. Since then the state of the art method was used for further improvements of SSM’s winding technology for the benefit of their customers.

The first part of the density analysis is performed on an industrial x-ray CT (XRCT) scanner. Here the yarn package is digitally x-rayed from several directions. These recordings are then calculated for a three dimensional computer model of the yarn package. The computer model serves as raw-data source for the final analysis. Several cross sections are measured to form the mean density profile of the examined package. The density analysis with an XRCT scanner allows finding fine-tuned winding recipes for specific requirements. Furthermore it enables SSM to steadily improve their winding technology or to create customized yarn packages. With its customers in mind, SSM is in contact with material testing labs to make the x-view™ analysis better available.

Thanks to the commitment to technological innovation, focused on cooperation with best partners in the field and with industry leaders, nowadays SSM is recognized as innovative leader in Yarn Processing and Winding – Swiss developer, leader and inventor of the electronic yarn traverse system.

For more information about SSM solutions please contact:

SSM Schärer Schweiter Mettler AG
Neugasse 10, CH-8810 Horgen / Switzerland
L_hc__mss--ofni, www.ssm.ch

Thanks to the SSM App, helpful information is available all the time. With the SSM Mobile Tools you got a quick access to SSM's product range and news, as well as to useful tools to enhance your productivity and to plan your production.

Being smart with SSM and join it now! Click on the below icons and download the app from the store.

For more information about SSM solutions please contact:
SSM Schärer Schweiter Mettler AG, Neugasse 10, CH-8810 Horgen / Switzerland
Phone: +41 44 718 33 11
Fax: +41 44 718 34 51
L_hc__mss--ofni

• SSM Mobile in the App Store of Apple Inc.
• SSM Mobile in the Google play Store